Fabric defects: Off shade, slub, miss pick, dyeing fault, fold mark, stain, water mark etc.
Material function: zip, button, Velcro – Closing/Adjusting the gmts.(uses @ CF, hood, cuffs, fly etc). D’cord- adjusting the gmts as necessary measurement/fittings (uses @ hem, hood, waist etc).
Test: Color fastness, Color combination, Water resistant, Coating delamination, Shrinkage, Heat sublimation test, Button pull test, Storage test.
Fabric/Material Inspection: After getting the fab/trim receiving status, QA select fab. Roll/Trims randomly for inspection as per AQL 2.5 chart. If fab insp in 2.5 AQL findings not acceptable, continue for 60% insp. If also fail then go for 100% insp & make claim to fab supplier and Trims in AQL 2.5 failed, continue insp for another 20% for clarification. If fail mark in red tag & go for 100% insp. & make claim to trims supplier.
No comments:
Post a Comment